Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$169.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm
$20.00 - $29.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets
$39.95
- Enhanced aerobar position performance - Long term pressure distribution - Anti-slip surface Upgrade your Profile Design aerobars to maximize your performance and enhance comfort while in the aero position. The Ergon CRT Arm Pads for Profile Design help to maintain the perfect aero position for many hours during time trials and triathlons. Made from high end OrthoCell foam, the pads prevent pressure discomforts and noticeably dampen road vibrations. The surface is slip-resistant to help you fully focus on your race!
$7.99 - $28.99
A Quick Release Chain Link might have the greatest value-to-weight ratio of any Item in your toolkit. Keeping some stashed on every bike and in every kit is a no-brainer. FSA has you covered with 8-packs to cover your needs.
$1.20 - $18.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$7.99
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$3.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
$9.99 - $19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$49.99
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
$18.00
Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.
$24.99 - $30.00
Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.
$30.00
Large surface area triathlon or TT aerobar armrest elbow pad with contoured edges to provide support and relieve pressure points. - F-35 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover - Compatible with F-35a Aluminum, F-35c Carbon, F-35i Injected, and F-35 Adjustable Armrests - Weight: 26g/pair
$33.00
The Race and Ergo Ultra pads allow riders to tune their setups for a snug fit. - New foam that resists being crushed for longer periods of time - Improved surface durability - Superior grip with a molded-in textured surface - Compatible with both the Ergo and Race armrest kits - Dimensions: Race (92.9mm x 887.5mm) or Ergo (108.4mm x 87.5mm) - Compatibility: Race / Ergo - Weight: 5mm: 21g / 10mm: 37g
$42.00
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
$55.00
The Ergo is the core of our new family of fit and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The Ergo is compatible with all current aerobars and earlier models that used the F-19, F-22, F-35 or F-40 armrests. - Armrest Construction: Injected Nylon/Glass Fiber - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Pad Model: 10mm - Color: Matte Black - Hardware: M6 x 10 FHB - Weight: 145g/pair
$28.00 - $45.00
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$5.99
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
$7.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$25.00
- SRAM, Road pulleys, 11.7515.060.000
$39.00 - $40.00
Replacement hoods for SRAM hydraulic shifter/brake levers.
$22.00
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$26.99 - $29.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
$103.99 - $135.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
$35.00
Need to convert your Venge ViAS aero bars to be used with the Tarmac SL7? This is the clamp for you. Replacement clamp to convert aerobars from the ViAS system to the Tarmac SL7.
Page 1 of 2 Next page